Torn screens, broken doors or storm damage — we repair and rescreen pool cages, lanais and screened patios from Sarasota to Naples. Licensed CGC contractor. Free on-site estimate.
Response within 24 hours · No obligation · Serving West Coast Florida
At Forge Point Contracting LLC, we specialize in pool cage restoration, pool enclosure rescreening, and lanai screen repair across Florida. Whether your screen enclosure needs the DTM Bonding Primer and Pro Industrial DTM Acrylic paint system, complete 304 stainless steel hardware replacement, or full rescreening — our team delivers a finish backed by a 5-year paint warranty and lifetime hardware warranty in the Florida climate.
With 10+ years rescreening pool cages, lanais and screened patios from Sarasota to Naples, we've built our reputation on one thing: screens that fit tight, look clean and hold up through Florida's storms. We measure every panel on-site, cut to match exactly, and install under proper tension — no wrinkles, no shortcuts, no subcontractors.
Before a single screen goes in, we walk the cage with you and go over screen options based on your needs and budget. Standard fiberglass works for most enclosures and covers most budgets. No-See-Um mesh blocks the insects standard screen misses — critical near water or wooded lots in Sarasota and Bradenton. Pet-resistant screen handles dogs and cats that push into the frame. Florida Glass gives the clearest sightlines with maximum light. Once you choose, we measure every panel individually — pool cages are never perfectly symmetrical, and a screen cut to nominal dimensions will sag within a season. On-site measurement is what separates a rescreen that holds for 10 years from one that fails after the first storm.
Installation runs from the largest roof panels down to the smallest side panels — not randomly, not by what’s easiest to reach. Starting large sets the structural tension of the entire cage: roof panels carry the most wind load during hurricane season, and getting them right determines how the rest of the frame behaves in a storm. Each panel gets splined, tensioned and checked before the next one goes in. This sequence is why our pool cage rescreening holds where a rushed installation fails after the first 60 mph gust. It also applies to pool screen repair jobs — even when we’re replacing a single damaged panel, we match the spline size, tension and screen type of the surrounding sections so the repair is invisible and structurally consistent.
Once every panel is in, we do a full tension walk — pushing and pulling each screen to check for soft spots, loose spline and uneven pull. A screen that looks fine from 10 feet can have a low-tension corner that fails in the first sustained wind. Any panel that doesn’t pass gets resplined on the spot before we move on. We clean up completely — all spline scraps, cut screen material and packaging off your deck and pool area. Then you walk the finished enclosure with us before we leave. If anything moves, sags or looks off to you, we fix it right then. That’s what our workmanship warranty covers from day one — whether the job was a full pool cage rescreen or a repair to a single section after storm damage.
Need restoration — painting, structural work? → See Our Full Pool Cage Restoration Service & Paint Options
Avoid torn screens, bugs, and costly damage with professional rescreening services.
Choosing the wrong screen can lead to poor protection, discomfort, and faster wear.
We guide you through the best options for your pool cage rescreening in Sarasota, ensuring you get the right balance of durability, visibility, airflow, and protection.
Florida weather can be tough on any pool enclosure. Constant sun exposure, heavy rain, humidity, and strong winds can weaken screen panels over time, affecting both protection and appearance. That's why choosing the right time to rescreen — and the right materials — makes a big difference in the long-term value of your enclosure.
Our pool cage screens are designed to withstand:
Standard screens can last up to 10 years, while premium options can last up to 15 years.
If you notice these signs, your enclosure may be losing protection and strength.
Full pool cage rescreening is the better long-term investment:
Replacing only a few panels may seem cheaper initially, but leads to more costs later.
Explore our screen options for pool cage rescreening, pool screen repair, patio enclosures, lanais, and screened porches. Our durable screens are designed to improve airflow, reduce debris, block insects, and withstand Florida's heat, humidity, and storms.
5 Year Warranty
Privacy Screen is a durable vinyl-coated fiberglass mesh designed for pool cages, patios, and lanais. It helps reduce outside visibility, block insects and debris, and create a more private, comfortable outdoor living space.
5 Year Warranty
The 20x20 screen is a vinyl-coated fiberglass mesh ideal for pool cage rescreening and patio enclosures. Its tight weave helps block small insects like no-see-ums while still allowing airflow, visibility, and reliable everyday protection.
5 Year Warranty
The 18x14 screen is a vinyl-coated fiberglass mesh commonly used for pool cages, lanais, and screen enclosures. It provides solid insect protection, good airflow, and dependable durability for homeowners seeking a practical, cost-effective screen option.
5 Year Warranty
Sun Screen is a vinyl-coated fiberglass mesh made to reduce sunlight, glare, and heat in pool cages, patios, and lanais. It also helps block insects while creating a cooler, more comfortable, and more protected outdoor area.
12 Year Warranty
Super Screen 17x20 is a high-strength polyester screen built for premium pool cage rescreening and enclosure protection. It offers advanced defense against small insects, strong tear resistance, and long-lasting durability in harsh Florida weather.
12 Year Warranty
Super Screen 16x14 is a high-strength polyester screen designed for durable pool cage rescreening and outdoor enclosures. It delivers excellent insect protection, strong tear resistance, and long-term performance for homeowners who want a premium screen solution.
Restore your enclosure with professional pool cage rescreening and long-lasting protection.
Featured Restoration Project
When your pool cage needs to be restored — not rebuilt. Drag the slider to see a large-format enclosure repair completed in West Coast Florida.
At Forge Point Contracting LLC, we know not every damaged pool cage needs to come down. If you want to keep the original look of your aluminum enclosure without repainting it, our aluminum pool cage repair service restores it to safe, code-compliant condition — at a fraction of the cost of a full rebuild.
We repair every type of aluminum damage: bends, hurricane-twisted beams, salt-air corrosion, and structural cracks. Every fastener we install is 304 stainless steel, backed by our lifetime warranty on hardware. When the screens are torn or sun-degraded, we pair the aluminum repair with full pool cage rescreening — all finished by a CGC-licensed Florida contractor (CGC 1535725).
Real Florida Projects
Drag the slider on each photo to see real pool screen repair, pool cage repair, screen enclosure repair, and aluminum frame repair projects we've completed across West Coast Florida — from Sarasota and Bradenton down to Naples.
Pool Screen Repair 📍 Sarasota, FL
Full pool screen repair after Hurricane Helene tore through every panel on the south wall. We rescreened the entire cage with no-see-um mesh and 304 stainless hardware — same-week start, two days on site.
Pool Cage Repair 📍 Cape Coral, FL
Homeowner called for a pool cage screen repair near me after a fallen oak branch ripped four panels and bent two beams. We straightened the frame, rescreened the affected sections, replaced every corroded fastener with 304 stainless, and refinished the frame in a fresh color.
Screen Enclosure Repair 📍 Bradenton, FL
A 12-year-old screen enclosure repair job that combined frame restoration, pressure wash, anti-corrosion repaint, and full rescreen with Florida Glass mesh. Faster and 60% cheaper than a full rebuild.
Aluminum Frame Repair 📍 Fort Myers, FL
Aluminum pool cage repair on a coastal property where salt air corroded the base plates and bent two upright beams. We replaced the corroded sections, treated for salt exposure, and finished with marine-grade powder coat.
Need a repair on your pool cage, screen enclosure, or lanai? Free estimate — in-person across West Coast Florida or via satellite measurement.
High Impact Comparison
Not all rescreening services are the same. Choosing the wrong contractor can cost you more in the long run. Here's the real difference:
Pool Cage Rescreening
Pool Cage Rescreening
WHY CHOOSING QUALITY MATTERS Cheap rescreening might seem like a good deal… but it often leads to repeated repairs, poor protection, and higher long-term costs.
Professional rescreening ensures your pool enclosure looks better, lasts longer, and performs the way it should.
👉 Don't settle for cheap work that won't last.
Upgrade your pool enclosure with clean, tight screens built for Florida weather.
Keep bugs out and enjoy your outdoor space again with expert rescreening services.
our services
Shield your pool from bugs, debris, and Florida sun with a custom aluminum screen enclosure — engineered to hurricane code, sized exactly to your backyard layout.
Read More about Pool Screen Enclosure
Open sightlines, fewer beams, stronger profiles. Our panoramic pool enclosures combine modern aesthetics and hurricane-rated aluminum performance for your backyard.
Read More about Panoramic View Enclosure
Add a screened in porch to your front or back yard — aluminum framing, your choice of screen mesh, Florida-code hardware, and a free on-site estimate included.
Read More about Screened In Porch
Torn screens, rusted hardware, or bent frames don’t need a full rebuild. We rescreen, repair, and reinforce your existing enclosure to Florida wind code standards.
Read More about Painting & RestorationEnhance your screen enclosure with premium add-ons — installed by Forge Point Contracting specialists across Florida.
We inspect and secure every kick plate in your screen enclosure — ensuring they are free of damage and properly anchored. A final step that reinforces your pool cage structure and completes the restoration.
You choose the size and location — we custom-build the aluminum frame and install your pet door directly into your screen enclosure. Clean, secure, and perfectly fitted from day one.
Our Phifer Glas-Shield fiberglass mesh delivers privacy without sacrificing airflow — blocks sightlines, keeps debris out, and holds up against Florida sun, rain, and UV exposure year-round.
Overflowing or leaking gutters rot the fascia and weaken your enclosure. Forge Point Contracting replaces failing systems with wider Super Gutters — sized to handle your roof's water flow and protect the cage.
Upgrade your pool cage with a custom design door — extruded aluminum frames, mechanically fastened corners, and corrosion-resistant hardware for lasting elegance and structural integrity.
Pricing & Custom Solutions
We offer competitive pricing for both Pool Screen Repair and full Pool Cage Rescreening services. Screen replacement starts at $1.50 per square foot, with total project investments typically ranging from $500 to over $1,500 — depending on enclosure size, screen type, panel count, and selected add-on options.
Every rescreen is customized to your enclosure — final pricing reflects the panels, screen material, and add-ons you choose. Exact figures come from a free on-site estimate.
Per-square-foot pricing for screen replacement with polyester screen backed by a 12-year warranty.
Total project investment typically ranges from $500 to over $1,500, based on the full scope of work.
Final cost depends on enclosure size, screen type selected, panel count, and chosen add-on options.
Tailored Solutions
Project pricing may vary based on the screen materials and add-on options selected for your enclosure:
Our rescreening services are designed to deliver the optimal balance of durability, visibility, airflow, and protection — ensuring each project is customized to meet the unique needs and expectations of every homeowner.
Licensed and insured Florida contractors, with free estimates and transparent quotes and timelines. If your question is not answered here, give us a call.
Still have questions? (941) 323-6555Pool cage rescreening lasts up to 10 years with standard screens and up to 15 years with premium options like Super Screen polyester, which carries a 12-year warranty. Lifespan depends on sun exposure, storms, and installation tension — panels measured on-site and properly splined hold far longer than rushed work.
Pool cage rescreening is needed when you see torn or missing screens, loose or falling spline, faded or shiny mesh, rusted screws, or unstable panels. Standard screens last up to 10 years in Florida sun, so enclosures near that age are usually due. A free on-site estimate confirms whether repair or full rescreening fits.
Forge Point Contracting offers both pool screen repair and full pool cage rescreening across West Coast Florida, with screen replacement starting at $1.50 per square foot. Single-panel repairs match the spline size, tension, and screen type of surrounding sections; widespread wear usually calls for a full rescreen. Free on-site estimates cover both options.
Pool cage rescreening includes a three-step process: on-site measurement of every panel with screen selection, largest-to-smallest installation with proper spline tension, and a full tension walk with complete cleanup and client sign-off before the crew leaves. Old screen and spline removal is part of the job, and workmanship is covered by warranty from day one.
The right screen for pool cage rescreening depends on your priority: standard 18x14 fiberglass covers most budgets, No-See-Um 20x20 mesh blocks the smallest insects, Sun Screen cuts glare and heat, Phifer Glas-Shield adds privacy, and Super Screen 17x20 polyester carries a 12-year warranty. We walk the cage with you and match screen to needs and budget.
Pool cage rescreening in Sarasota starts at $1.50 per square foot, with total projects typically running $500 to over $1,500. Final cost depends on enclosure size, screen type, panel count, and add-ons like No-See-Um mesh or pet doors. A free on-site estimate gives exact pricing for your enclosure.
Pool enclosure rescreening typically takes one to two days on site — a full hurricane-damaged cage in Sarasota was rescreened in 2 days. Timing depends on enclosure size, panel count, and weather, and same-week service is available. Every job ends with a full tension walk and cleanup before the crew leaves.
Full pool cage rescreening usually delivers better long-term value than replacing a few panels — new polyester screen carries a 12-year warranty, with typical projects running $500 to over $1,500. Partial fixes look cheaper upfront but lead to more costs later as remaining panels age unevenly. A free on-site estimate compares both options for your cage.
“I was hesitant about restoring a pool cage, but the final project is truly outstanding — it looks and feels like I have a brand new pool cage. From the initial estimate to the finished project the team communicated very well, were friendly and professional, and did quality work.”
“We had our rear screen-wall lanai re-screened, with many tubular supports removed and replaced — a beautiful clear-vision, open view to our lake. We now enjoy an unobstructed view that will undoubtedly add value to our home.”
“Great job refurbishing our screen enclosure and upgrading to Clearview screen. Very happy with the entire process. Victoria was very helpful and responsive when questions arose.”
“Not only did they do a great job, it was done faster than I expected. The price was very reasonable for the work I needed, and they took the time to explain things. I will definitely be calling them again for future repairs!”
We proudly serve the entire West Coast from Spring Hill to Naples with offices in Tampa, Bradenton, Sarasota, and North Port.
We use top-notch equipment, tools, and techniques to provide the best service.
Tell us what you have in mind — a new pool, a screen enclosure, or a repair. We will come out, measure, and put a written price in your hands.
Prefer to talk? (941) 323-6555